top of page
Padel court Ireland

Panoramic RC10

The RC10 PANORAMIC COURT is our 2023 model, a court designed for the Padel of the future. With corners added to the Full Panoramic version, it allows customization with more colour. It complies with the specifications of the International Padel Federation.

  • New court in 2023

  • FIP specifications

  • No structural elements in the glass areas.

  • Offers a spectacular indoor and outdoor view, both for the player and the spectator. Adapted for all environments and locations, while allowing a fantastic panoramic view for televised matches.

Panoramic RC10

Padel court design
Padel court design

Padel court 20x10 m. made of galvanized steel structure painted or coated with epoxy-polyester resin baked in the oven according to the characteristics of the technical specifications. Galvanized electro-welded mesh 50x50x4mm with delivery without interior projections. Frame joints with threaded rods, washers, and rounded stainless steel blind nuts. Double entrance door opening of 1.10 cm.

Including posts and netting fully finished in accordance with FIP material approvals.

Optional custom corner finish, beams in 140x60x2 galvanized structural tubing. Sides 80.60.2 in intermediate 3 m high, anchor plates 300x180x10 mm and 200x190x10 mm with 10 mm sheet metal gussets, with screws m14 or higher and metal plugs minimum length 140 mm.

Fastening to the floor by means of " or similar type dowels, metal structural reinforcement brackets up to 0.5 m in height at the base of pillars supporting glass, horizontal crosspieces at 1 m and 2 m of 30x30x2mm for anti-panelling, upper sealing of pillars with PVC plugs.


Certified 12mm tempered glass for the panoramic backgrounds and for the sides. In the case of the side windows, this court can mount 2 large 2x3m windows, the same size as the bottoms or the traditional system. All of them are installed on 5mm neoprene to reduce vibrations and breaks. The manufacturing process of all this tempered glass is manufactured using a standardized production process and in compliance with the UNE EN 12150-1 standard.

Advantages of the tempered glass:

  • Ability to withstand tensile stress, with a higher resistance than that of annealed glass.

  • In case of breakage, the tempered glass disintegrates into small fragments that do not cause serious cutting or lacerating injuries, such as those that would be caused by the sharp edges of small pieces of annealed glass.

  • These characteristics make tempered glass a good choice for people's safety, especially since it does not break into sharp or large shards.

  • Tempered glass has four times the mechanical strength of annealed glass.


Padel court design
Padel court design

LED lighting with 8 spotlights of 150w or 200w is specially designed for our padel courts.

According to NIDE standards, the lighting of a paddle court will be uniform and in a way that does not hinder the vision of the players, the referee team, or the spectators.

We comply with the UNE EN 12193 standard "Lighting for sports facilities".

The advantages of LED projectors for Padel courts:

  • Instant on, so you can make the most of the player's time on the court, as opposed to traditional halide spotlights that take time to to reach their maximum luminosity.

  • Low heat emission, highly recommended for indoor paddle courts due to their small size.

  • Compliance with the lighting regulations of the International Padel Federation.

  • Energy saving, our LED projectors save up to 65% of energy compared to traditional halide bulbs.


The metallic elements are covered with a thermosetting powder polyester paint formulated with polyester resins. This finish, in a color desired by the client, provides these elements with good resistance to corrosion and ultraviolet rays, as well as being highly resistant to mechanical impacts .

Once the powder paint is applied electrostatically on the surface of the material, the pieces go to an oven where they are heated to a temperature between 180ºC-200ºC, in which polymerization occurs.

In coastal / maritime areas where salt fog is formed which, driven by the wind, generates conditions of high risk of corrosion. (especially in the first 100m), we apply a set of extra actions that involve protecting the metal structure of the track against corrosion.

The structure can be painted with the RAL that the client decides, optionally the track can be painted in 2 shades, for example the stalk of the spotlights can be in a different color.


Padel court design
Padel court design
  • Length: 20 m (internal dimensions of the game) 20.40 m (external dimensions of the court).

  • Width: 10 m (interior measurements of the game) 10.40 m (exterior measurements of the court)


Optionally this court can integrate a ring of portability, it does not require screws to anchor it to the ground.


Ideal for events or to install it in an area where it is not possible to drill holes. Example: on top of a tennis court.


Padel court design
Padel court design

Optionally you can buy:

  • Net protectors with custom logo

  • Protectors for the exits and net post, to avoid injury to the players.

  • Personalized spotlight staves

  • Protective nylon net on bottoms and / or sides to avoid the loss of balls.

  • Custom competition game net


64917350270212395e989ee2_MS_Web RC100004.jpg
bottom of page